Horizon Imager User’s Manual 3-3
Basic Imager Operations
mçïÉêáåÖ=lå=íÜÉ=fã~ÖÉê
Press the (power) key at the control panel.
When the imager is powered on, startup status messages are
displayed at the control panel display. The startup process takes
2 to 3 minutes. When the Status screen displays, the imager is
ready to receive images.
NOTE:
There are ways to get more detailed information about the imager’s operating status.
For more information, refer to the Horizon Imager Technical Manual.
mçïÉêáåÖ=íÜÉ=fã~ÖÉê=lå=~åÇ=lÑÑ
8
To power on
the image
3
To Next Page
Loading...
