Horizon Imager User’s Manual 7-1
Printing via FTP and LPR
=T
mêáåíáåÖ=îá~=cqm=~åÇ=imo
Support for receiving print jobs via FTP and LPR comes standard
with the imager. FTP and LPR are advanced methods for sending
print jobs, typically used by system integrators. This chapter
provides basic instructions for sending print jobs via FTP and LPR.
However, for a complete explanation about how to use these
methods, refer to the
Horizon Imager Technical Manual
.
FTP (File Transfer Protocol) is a protocol that enables you to login
to the Horizon imager from your workstation and send image files
to be printed. You can also send text files containing custom
commands and parameters used to set up your sheets and process
the images.
FTP uses the TCP/IP networking protocol and is available for most
computer platforms, including UNIX, Linux, MS-DOS/Windows,
and Macintosh.
The procedure that follows explains how to FTP image files from a
command window on your workstation. If you are using a
GUI-based FTP application, you will likely click buttons and drag
files from one window to another instead of entering commands.
mêáåíáåÖ=îá~=cqm
To Next Page
Loading...
