Codonics Horizon - Configuring the DICOM Application

5-4 Printing from DICOM Applications
Your key operator or DICOM application vendor must configure the
DICOM application running on each imaging device or image
viewing workstation to support printing to the Horizon imager.
To properly configure a DICOM application to support printing to
the Horizon imager, you need to know the Called AE Titles that can
be used to identify the imager, and its TCP port number.
The port number is
104 . The Called AE Titles are listed in the
following table, which also describes how they are used.
For more information about the Horizon information needed to
perform this configuration, refer to the
Horizon Imager Technical
Manual .
`çåÑáÖìêáåÖ=íÜÉ=af`lj =^ééäáÅ~íáçå
Called AE Title That Can Be Used Description
Print_SCP For standard print jobs.
SpecialBracket For printing bracketing sheets. For more
information, refer to Chapter 9.
SpecialSlide For printing 35-mm slides. For more
information, refer to the Horizon Imager
Technical Manual.
The name of a Job Settings file For printing using Job Settings files to
specify print job parameters.