Codonics Horizon - Imager Macintosh Postscript Parameters

Horizon Imager User’s Manual 6-21
Printing via PostScript
Table 6-2. Horizon Imager Macintosh PostScript Parameters
Parameters Settings Description
Paper Size Settings (Page Setup dialog box)
Paper Size HZ-8x10_DVpaper
HZ-A_DVpaper
HZ-A4_DVpaper
HZ-11x14_DVpaper
HZ-14x17_DVpaper
HZ-8x10_DVfilm_blue
HZ-11x14_DVfilm_blue
HZ-14x17_DVfilm_blue
HZ-8x10_DVfilm_clear
HZ-11x14_DVfilm_clear
HZ-14x17_DVfilm_clear
HZ-8x10_CVpaper
HZ-A_CVpaper
HZ-A4_CVpaper
Specifies the Horizon media type and size to use.
Use one of the Horizon page sizes. Avoid using
non-Horizon paper sizes and special types, such as
Letter, as these may give unpredictable results.
Print Job Settings (Print dialog box: OS X—Sets 1 and 2; OS 8 & 9—Printer Specific Options)
Output Bin Upper, Middle, Lower Specifies which receive tray to use.
Driver Version Current driver version This parameter cannot be changed. It is always set to the
current driver version number.
Sheet Layout Unscaled, Scaled, GCS
(or GCT) Bracket, MCM
Bracket
Specifies whether the image will be scaled or not, or
whether to print a bracketing sheet.
Use Unscaled to print the image at original size. Use
Scaled to print the image scaled to the media size.
For information about the bracketing sheets, refer to
Chapter 9.
Antialias None, Better, Best None—no antialiasing is performed.
Better—a compromise between antialiasing quality and
print speed.
Best—highest antialiasing quality, but requires the most
processing time.
Crop Margin Yes, No Eliminates white margin around region of interest.
Advanced feature. Refer to the Horizon Imager Technical
Manual for more information.