6-20 Printing via PostScript
kçíÉë=^Äçìí=`Ü ~åÖáåÖ=mçëípÅêáéí=m~ê~ãÉíÉêë
•
There are other, non-Horizon-related parameters included in the
set of available PostScript printer parameters. Because
unpredictable results may occur, it is recommended that you
change the defaults for only those Horizon imager parameters
listed in Table 6-2 on page 6-21.
•
Some of the “Selectable Values” shown in Table 6-2 may depend
on available Horizon imager options and thus may not appear
on some systems.
•
Settings made at print time via the Print dialog boxes will take
precedence over settings made at the imager. Note, however,
that a “Use Printer Default” setting can be chosen for many of
the parameters in the Print dialog box. Note that the exact
wording of the “Use Printer Default” setting can vary depending
on which Macintosh OS and application you are using.
To Next Page
Loading...
