Codonics Horizon - Changing Horizon PostScript Parameters-Windows 2000 and XP

Horizon Imager User’s Manual 6-15
Printing via PostScript
`Ü~åÖáåÖ=eçêá òçå=mçëípÅêáéí=m~ê~ãÉíÉêëÔtáåÇçïë OMMM=
~åÇ=um
NOTE: This procedure assumes that the PostScript driver for the Horizon imager has
already been installed on the workstation. For more information, refer to the “Windows 2000
Driver Installation—Horizon” or “Windows XP Driver Installation—Horizon” Technical Brief.
1. Initiate the print job from the Windows application.
The Print dialog box displays.
2. Make sure that the Horizon imager is the selected printer.
3. Click the Properties button.
The Document Properties dialog box displays.
4. Click the Advanced button.
The Advanced Options dialog box displays.
5. Specify a Horizon media size and type combination from the
Paper Size drop-down list. The Horizon media choices begin
with “HZ.”
6. To specify any of the other Horizon PostScript parameter
settings, scroll to the Printer Features list of parameters.
3
8
To change the
PostScrip
t
parameters in
Windows 2000
and XP