Horizon Imager User’s Manual xv
Preface
Refer to this user manual for procedures on how to perform the
most common imager operations, including:
•
Setting up the imager
•
Loading media
•
Sending print jobs from DICOM Print Service Class-compliant
applications running on imaging devices or image viewing
workstation
•
Sending print jobs from workstations via PostScript
•
Sending print jobs using FTP and LPR
•
Changing the imager’s default image and sheet settings
•
Adjusting the appearance of printed images for user preference
•
Performing preventive maintenance
•
Performing film calibration
•
Troubleshooting common problems
NOTE:
Some features and functions described here may not apply to older versions of the
software.
This User’s Manual is intended to be as simple and straightforward
as possible for the everyday user. If you need more detailed or more
technical information on a feature or topic, or wish to perform more
advanced operations, refer to the
Horizon Imager Technical
Manual
(Catalog no. HORIZON MNLT). The Technical Manual
serves as a companion document to this manual
mìêéçëÉ=~åÇ=pÅçéÉ
3
To Next Page
Loading...
