7-6 Printing via FTP and LPR
bñ~ãéäÉë=çÑ=mêáåíáåÖ=rëáåÖ=imo
For the first example, assume that the LPR printer
horizon2
has
been configured to print 1-up scaled image sheets using the
imager’s Default User Settings (that is, no Job Settings file has been
specified in the printer’s configuration). To print 3 copies of a single
scaled image called
image.tif
, you would enter:
lpr -Phorizon2 -#3 image.tif
For the second example, assume that the LPR printer
horizon23MJS4
has been configured to print 6-up FMF sheets
using the Job Settings file
MYSETTINGS4
. To print 1 copy of 6
JPEG image files without spooling the image files, you would enter:
lpr -Phorizon23MJS4 -s image1.jpg image2.jpg ...
image6.jpg
There are some other common operations that you may want to
perform using the LPR. For complete information about how to
send print jobs using LPR, refer to the
Horizon Imager Technical
Manual
.
péÉÅáÑóáåÖ=íÜÉ=jÉÇá~=qóéÉ=~åÇ=páòÉ=rëáåÖ=
imo
To set the media type and size to use for a given print job using LPR,
you have two options:
•
Simply send the print job. The Horizon imager will determine
whether the image is grayscale or color. The imager will then
use the default media type/size defined for that image type. For
more information about how to define the default media
type/size to use for grayscale and color images, refer to
“Changing the Default Media Type and Size” on page 8-3.
•
Use a Job Settings file that specifies the media type/size on
which you want to print. For more information on Job Settings
files, refer to the
Horizon Imager Technical Manual
.
To Next Page
Loading...
