6-22 Printing via PostScript
Margin Size 0 to 50 (pixels), in
increments of 5
Works with Crop Margin to create small border around
region of interest.
Advanced feature. Refer to the Horizon Imager Technical
Manual for more information.
Print FMF After Job Yes, No Not currently implemented. Always select Use Printer
Default.
Skip Blank Pages Yes, No Prevents printing of a sheet or cell if blank.
Sheet Settings (Print dialog box)
Dmax 100 to 400, in increments
of 10
Maximum image density value.
Dmin 0 to 100, in increments of
10
Minimum image density value.
Sheet Coverage Standard, NP, or
Fullbleed
Corresponds to the imager’s Coverage sheet parameter.
Determines whether there will be a border between
images and edges of the sheet, or images will bleed off the
sheet edges.
Advanced parameter. Refer to the Horizon Imager
Technical Manual for more information.
Film View Front, Back The direction from which the film is viewed once printed.
Lut Type Visual, Linear,
or
Custom1 through
Custom8
Look-up table. Customized data curves that affect an
image’s appearance.
Advanced parameter. Refer to the Horizon Imager
Technical Manual for more information.
Border Fill Yes, No Sets color of area around active print area of sheet.
Advanced parameter. Refer to the Horizon Imager
Technical Manual for more information.
Captions Yes, No Enables or disables captions, if any have been set up on
the imager. Note that captions cannot be set up via
PostScript.
For information about how to set up captions, refer to the
Horizon Imager Technical Manual.
Image Warnings Yes, No Enables or disables the warning message included on a
sheet if a printed image is decimated.
Table 6-2. Horizon Imager Macintosh PostScript Parameters (cont.)
Parameters Settings Description
To Next Page
Loading...
