Codonics Horizon - Saturation

D-8 Print Job Parameters
Rotate
Specifies whether image
should be rotated 90°
counterclockwise on the sheet.
Only valid if printing a scaled
single-image sheet (logical
device 2).
Auto
(rotate image to make
as large as possible)
Never
Always
Auto

Saturation
A property of color that
specifies how far a color is from
a gray tone of the same
density.
Negative settings reduce
saturation, positive numbers
increase saturation (-100 = no
color; 0 = no adjustment; 100 =
full color).
Typical settings to add
vibrancy to an image are 0 to
50.
-100 to 100
NOTE: For NP-series
imager legacy support,
TCR values from 0 to
100 are mapped to
Saturation values -100
to 0.
0

Table D-3. Image Parameters (cont.)
Parameter Description Possible Values Default
DirectVista Film—Blue DirectVista Film—Clear DirectVista Paper/White Film ChromaVista Paper/White Film