Codonics Horizon - MCM

Horizon Imager User’s Manual D-7
Print Job Parameters
MCM
Medical Color Matching. When
enabled, algorithms are
applied to the image data
before printing so that printed
images match those displayed
on a monitor.
0 = MCM disabled
1 = Sony Trinitron
2 = ViewSonic G810
3 = NEC MultiSync
1880SX
4 = NEC MultiSync
1880SX Alternate 1
5 = Sony Trinitron
Alternate 1
6 = NP-1600 MCM 6
Equivalent
7 = ViewSonic G810
Alternate 1
8 = Sun Monitor 1
9 = 3D rendering, CRT
Monitors
10 = 3D rendering,
LCD Monitors
11 to 17 = future use
100 to 999 = OEM-
specific custom
settings
0

Nudge Adjusts the position of
an image on the film by
up to 20 pixels
(1.6 mm) in any
direction.
NOTE: The Nudge
parameter is valid for
DICOM printing only.

Polarity
Inverts the pixel values of an
image between Positive (no
adjustment) and Negative
(reverses the polarity).
Negative polarity can be useful
in certain applications such as
nuclear medicine.
Positive
Negative
Positive
   
Table D-3. Image Parameters (cont.)
Parameter Description Possible Values Default
DirectVista Film—Blue DirectVista Film—Clear DirectVista Paper/White Film ChromaVista Paper/White Film