Codonics Horizon Series - The Pause State; Pausing the Imager

3-22 Basic Imager Operations
You must pause the imager:
 If you want to replace a supply cassette. If you pull the cassette
out while the imager is picking the sheet, it could cause a jam.
Or, if the sheet is already printing and you pull the cassette, it
could cause an artifact to be printed on the sheet.
 If you want to temporarily stop printing.
The imager automatically enters the Pause state due to certain
conditions, such as if you select the Open Top Cover function from
the Utilities menu to clean the thermal print head or platen, or if a
sheet jam occurs.
m~ìëáåÖ=í ÜÉ=fã~ÖÉê
Press the key.
Printing pauses. If a print is in progress, the sheet completes
printing before the imager pauses.
When the imager is paused, the 2 1/,1( indicator is off, a message
indicating that the imager is paused is displayed, and the key
flashes (if not in a Fault state) to remind you to press it to resume
normal operation once you have completed the activity.
qÜÉ=m~ìëÉ=pí~íÉ
8
7RSDXVHWKH
LPDJH
U
3$86(
3$86(