4-6 Media Handling and Storage
When a print job is sent, the media type and size are specified in
the print job.
If the specified media type and size are supported by the imager
and the required supply cassette is not loaded, the imager will
display a message on the Status screen prompting you to insert
the appropriate cassette or ribbon.
If the specified media type and size are
not
supported by the
imager, the default type and size is used. Refer to “Changing the
Default Media Type and Size” on page 8-3 for more information
about setting the default type and size.
aÉíÉêãáåáåÖ=tÜáÅÜ=`~ëëÉííÉ=íç=rëÉ
To Next Page
Loading...
