12-16 Troubleshooting
`äÉ~êáåÖ=~=g~ã=Ñêçã=~=`~ëëÉííÉ
127(
:KHQDMDPRFFXUVWKHLPDJHUGLVHQJDJHVDOOPRWRUVWRDOORZ\RXWRVDIHO\SXOORXW
WKHVKHHW
1. Gently pull out the supply cassette indicated in the message on
the Status screen.
2. Check to see if the sheet is sticking out from the cassette or the
supply slot.
If the sheet is sticking out from the cassette or the supply slot,
pull it out gently; then go to step 8.
If the sheet
IS NOT
sticking out from the cassette or the supply
slot,
go to the next step.
3. Open the top cover (which has already been partially opened by
the imager).
:$51,1* :LWKWKHWRSFRYHURSHQWRXFKRQO\WKRVHLQWHUQDOFRPSRQHQWVWKDW
DUHFRORUHGJUHHQUHIHUWRWKHILJXUHRQSDJH [[[LL5HPRYHULQJVWLHVMHZHOU\
DQGRWKHULWHPVDQGWLHEDFNKDLUVRWKDWWKH\GRQRWIDOOLQWRRUJHWFDXJKWLQ
WKHLPDJHU
3
8
7RFOHDUDMDP
LQGLFDWHGE\
³&OHDUMDP
IURPFDVVHWWH
;