Cognex DataMan - Point; Imageproperties Object; Image Properties; Rect

Property Type Description
s integer Image acquisition timestamp sec property.
ns integer Image acquisition timestamp nanosec property.
Point
Point is the ordered pair of integer x- and y-coordinates that defines a point in a two-dimensional plane.
Property Type Description
x integer This value specifies the x coordinate.
y integer This value specifies the y coordinate.
ImageProperties Object
The following tables list the details of the ImageProperties object, its types and properties.
Image Properties
Properties of a captured image.
Property Type Description
index
integer The index of the image within the trigger.
FoV
Rect The Field of View, the area of image sensor used relative to the top left sensor
corner. The details of the Rect property type are listed in the Rect table below.
RoI
Rect The Region of Interest, the part of the FoV that is actually used, relative to the
sensor. The details of the Rect property type are listed in the Rect table below.
exposureTime
integer The exposure time in microseconds.
gain
integer The camera gain.
autoExposure
boolean True if automatic exposure is used.
illEnabled
boolean True if internal illumination is enabled.
illIntensity
integer The internal illumination intensity.
extillEnabled
boolean True if external illumination is enabled.
extillIntensity
integer The external illumination intensity.
targetBrightness
integer The target brightness in case of automatic exposure.
focusLength
integer The focus value in millimeters. It is 0 if NA.
setupIndex
integer The current index of read setup.
inputStates
array of boolean The state of the input lines when the trigger was started.
filterTime
integer The duration of filtering in milliseconds.
creationTime
integer Creation time.
creationTicks
integer Encoder ticks corresponding to image creation time.
ptpTimeStamp
ptpTimeStamp PtP image acquisition timestamp.
id
integer The numerical identifier of this image.
Rect
Rect describes the width, height, and location of a rectangle.
Property Type Description
top
integer This specifies the top value relative to the top left sensor corner.
bottom
integer This specifies the bottom value relative to the top left sensor corner.
left
integer This specifies the left value relative to the top left sensor corner.
right
integer This specifies the right value relative to the top left sensor corner.
31
DataMan Application Development