uniqueItemID
string The unique item identifier.
batchNum
string The batch number.
QualityMetrics Object
The following tables list the details of the QualityMetrics object, its types and properties. The details of the Metric property
type are listed in the Metric table below. All the metrics listed are available for all the standards available under the
Symbology Settings pane in the DataMan Setup Tool.
Quality Metrics
Describes the quality of all measured parameters.
Property Type 1DîStandards 2D Standards Description
singleScanInt
Metric 1D Readability The single-scan
integrity, raw member
is set to -1. Single-
scan integrity is a
general measure of
the ease of decoding
a barcode using only
a single scan across
it. This is meant to
represent the way that
simple decoders
work. In general, such
algorithms are not
advanced and the
decodability is lower if
a symbol has damage
in multiple locations in
the barcode. A low
singleScanInt metric
may indicate many
different problems, as
it is a general
measure of code
quality.
38
DataMan Application Development
To Next Page
Loading...
