Cognex DataMan - Validation Result; Gs1 Validation; GS1 Validation Details

Validation Result
Describes all details of the validation.
Property Type Description
state
integer
These are the validation states:
l notTried
l fail
l pass
The format of this property is “validation.state.notTried”.
method
integer
These are the validation methods:
l none
l gs1
l iso
l dod_uid
l pattern
l matchString
The format of this property is “validation.method.none”.
matchString
string This property returns with the previously configured match string. Match
string validation should be enabled for this.
failurePos
integer The position of validation failure.
failureCode
integer The validation failure code.
failureMsg
string The error message describing the cause of validation failure.
gs1
GS1 Validation The details of the GS1 Validation property type are listed in the GS1
Validation table below.
dod_uid
DoD Validation The details of the DoD Validation property type are listed in the DoD
Validation table below.
GS1Validation
GS1 validation details.
Property Type Description
AI00
string Identification of a logistic unit (Serial Shipping Container Code)
AI01
AI01
AI01
AI01
string
string
string
string
Identification of a fixed measure trade item (Global Trade Item Number)
Identification of a variable measure trade item (GTIN)
Identification of a variable measure trade item (GTIN) scanned at POS
Identification of a variable measure trade item (GTIN) not scanned at POS
AI02
AI02
string
string
Identification of fixed measure trade items contained in a logistic unit
Identification of variable measure trade items contained in a logistic unit
AI10
string Batch or lot number
AI11
string Production date
AI12
string Due date for amount on payment slip
AI13
string Packaging date
AI15
string Best before date
AI16
string Sell by date
35
DataMan Application Development