Property Type Description
raw
integer Outputs the raw modulation values for each module.
grade
string Outputs the letter grade (A-F) for each module.
isBlack
boolean Outputs a 0 if the module is white or a 1 if the module is black.
TruCheckMetricOverall
Property Type Description
aperture
integer The aperture in mils used to verify the symbol.
applicationStandardName
string The application standard used to verify the symbol.
applicationStandardPass
string The PASS or FAIL assessment of the symbol according to the application
standard.
gradeLetter
string The overall letter grade (A-F).
gradeValue
float The overall numeric grade (0.0-4.0).
gradingStandard
string The grading standard used to verify the symbol.
lighting
string The lighting option selected for verification.
wavelength
integer The wavelength used for verification in nm.
TruCheckResult
Outputs the TruCheck values used for verification.
Property Type Description
alignmentPatterns
TruCheckMetricGradeOnly The grade values for the alignment pattern of a QR Code
symbol.
applicationStdArray
TruCheckApplicationStd An array of parsed data according to the selected
application standard.
applicationStdNotation
string The notes associated with the application standard data
parsing.
asciiArray
array of integers The ASCII values for the symbol.
averageGrade
TruCheckMetric Data Matrix fixed pattern damage metric that averages
multiple segments of its finder pattern.
axialNonUniformity
TruCheckMetric The axial nonuniformity (ANU) which is the aspect ratio
grade.
batch
string The batch number, if parsed from the symbol data.
bottomLSide
TruCheckMetricGradeOnly The grade for the bottom of the L-side of the symbol.
bottomQuietZone
TruCheckMetricGradeOnly The grade for the bottom quiet zone.
calibrationDate
string The last date of calibration.
cellContrast
TruCheckMetric The cell contrast value according to AIM-DPM (ISO
29158).
cellModulation
TruCheckMetricGradeOnly The cell modulation value according to AIM-DPM (ISO
29158).
codewordArray
The array of codeword values.
decode
TruCheckMetricGradeOnly The success or failure of the reference decode algorithm.
distributedDamageGrade
TruCheckMetric The distributed damage grade parameter.
encodationAnalysisArray
TruCheckMetricGradeOnly The array of encodation analysis values.
fixedPatternDamage
TruCheckMetric The fixed pattern damage parameter according to ISO
29158 (AIM-DPM).
33
DataMan Application Development
To Next Page
Loading...
