Colby Instruments PDL-100A - Relc Relc Command

Chapter 6 System Commands
© 2010 Colby Instruments. PDL-100A Operating and Programming Manual Page 57
RELC RELC COMMAND
Toggles (turn on and off) all relays for the specified number of
cycles.
Command
Syntax
RELC arg
arg is the number of cycles to toggle relays
Example
RELC 50
Returns
None
Programming
Example
HP : OUTPUT 705;"RELC 50"<NL>
NI : CWGPIB.Write “RELC 50”
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com