Colby Instruments PDL-100A - XDD XDD Command

Chapter 6 System Commands
© 2010 Colby Instruments. PDL-100A Operating and Programming Manual Page 61
XDD XDD COMMAND
Set the stepper motor rate acceleration limit.
Command
Syntax
XDD arg
arg = stepper motor rate acceleration limit.
Must be >= 500 and <=2000.
Example
XDD 2000
Returns
None
Programming
Example
HP : OUTPUT 705;"XDD 2000"<NL>
NI : CWGPIB.Write “XDD 2000”
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com