Colby Instruments PDL-100A - PDL-100 A Instrument Backpanel; PDL-100 A Backpanel Layout and Connections

Chapter 7 Backpanel
© 2010 Colby Instruments. PDL-100A Operating and Programming Manual Page 63
Instrument Backpanel________________
85 to 240
VAC
FAN
Ethernet Port
IEEE488.2
MT-100A or RS-232
GPIB ADDRESS
Ethernet 10/100
Cable
AC Power Cord
(IEC) connector
Set GPIB
Address
IEEE488.2/GPIB
Bus
To MT-100A Microterminal
with supplied DB9M-F cable
To PC with NULL MODEM
DB9F-M cable
`
OR
DB-9 Pin Assignment
PIN 1 UNUSED
PIN 2 RXD (TO PDL-100A)
PIN 3 TXD (FROM PDL-100A)
PIN 4 UNUSED
PIN 5 GND
PIN 6 UNUSED
PIN 7 UNUSED
PIN 8 UNUSED
PIN 9 +5V (FOR MT-100A)*
* = DO NOT USE WHEN CONNECTING WITH PC
VIA NULL MODEM CABLE.
00 = 00000
01 = 00001
02 = 00010
03 = 00011
04 = 00100
05 = 00101
06 = 00110
07 = 00111
08 = 01000
09 = 01001
10 = 01010
11 = 01011
12 = 01100
13 = 01101
14 = 01110
15 = 01111
16 = 10000
17 = 10001
18 = 10010
19 = 10011
20 = 10100
21 = 10101
22 = 10110
23 = 10111
24 = 11000
25 = 11001
26 = 11010
27 = 11011
28 = 11100
29 = 11101
30 = 11110
31 = 11111
7.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com