1 x USB A-B cable
Using the USB A-B cable, insert the A plug into a free USB port on the host computer.
Insert the B plug into the USB port on the CI-Bus Hub. When properly connected, the power indicator should
light.
3 – Oxymax
3.1 Negative Ventilation Setup
3.1.1 Overview
In a negative ventilation system, fresh air travels from the atmosphere into the cage, then through the air
supply line to the Universal Flow Controller (UFC). The air flows of all channels are regulated and passed to the
ventilation pump where it is returned to the atmosphere as illustrated below. One of the channels is selected
for sampling and provided to the Gas Sensor chain.
To Next Page
Loading...
Need help?
General