COMAC Vega 2019 - Page 37

The undersigned manufacturer:
COMAC S.p.A.
Via Maestri del Lavoro, 13
37059 Santa Maria di Zevio (VR)
declares under its sole responsibility that the products
FLOOR SCRUBBING MACHINES
mod. Vega 2019 65Bt CB; Vega 2019 75Bt CB; Vega 2019 85Bt CB; Vega 2019 70Bto CB;
Vega 2019 70Bts CB
comply with the provisions of Directives:
• 2006/42/EC: Machinery Directive.
• 2014/35/EC: Low Voltage Directive.
• 2014/30/EC: Electromagnetic compatibility directive.
They also comply with the following standards:
• EN 60335-1:2012/A11:2014
• EN 60335-2-72:2012
• EN 12100:2010
• EN 60335-2-29:2004/A2:2010
• EN 61000-6-2:2005/AC:2005
• EN 61000-6-3:2007/A1:2011/AC:2012
• EN 61000-3-2:2014
• EN 61000-3-3:2013
• EN 55014-1:2006/A1:2009/A2:2011
• EN 55014-2:2015
• EN 62233:2008/AC:2008
The person authorized to compile the technical le:
Mr. Giancarlo Ru󰀨o
Via Maestri del Lavoro, 13
37059 Santa Maria di Zevio (VR) - ITALY
Santa Maria di Zevio (VR), 19/06/2019
Comac S.p.A.
Legal representative
Giancarlo Ru󰀨o
37