COMAC Vega 2019 - Serial Number Plate; Technical Data

SERIAL NUMBER PLATE
The serial number plate is positioned above the electrical system cover carter inside the machine.
It indicates the general machine characteristics, in particular the serial number. The serial number
is a very important piece of information and should always be provided together with any request
for assistance or when purchasing spare parts. The serial number plate contains the following:
1. The weight of the batteries used to power the appliance (expressed in Kg).
2. The IP protection rating of the appliance.
3. The gross weight of the appliance (expressed in Kg).
4. The identication code of the appliance.
5. The serial number of the appliance.
6. The name of the appliance.
7. The nominal power consumed by the appliance (expressed in W).
8. The maximum grade that the appliance can handle during work activities (expressed in %).
9. The year in which the appliance was manufactured.
10. The nominal voltage of the appliance (expressed in V).
11. The commercial name of the appliance and the manufacturer's address.
11
10
9
8
7
6
1
2
3
4
5
TECHNICAL DATA
TECHNICAL DATA
U/M
[KMS]
VEGA
65 BT
VEGA
75 BT
VEGA
85 BT
VEGA
70 BTo
VEGA
70 BTo
Rated machine power kW 1,5 1,7 1,7 1,4 1,6
Theoretical working capacity up to m
2
/h 2425 2830 3145 2630 2370
Maximum working width mm 655 765 850 710 640
Squeegee width mm 785 885 985 885 885
Scrubbing brush head brush (Ø external bristles) mm 340 400 440 - -
Orbital brush head abrasive pad (width - length) mm - - - 710 - 355 -
Sweeping brush head brush (Ø external bristles - length) mm - - - - 180 - 615
Electrical characteristics of the brush head motor V / W 24 - 400 24 - 500 24 - 500 24 - 680 24 - 450
Single brush rpm rpm 140 140 140 - 550
Number of oscillations of the abrasive pad rpm - - - 2000 -
Weight exerted on the oor by the brush head kg 52 52 52 45 33
Traction motor electrical properties (voltage - power) V / W 24 - 300 24 - 300 24 - 300 24 - 300 24 - 300
Maximum slope during work (GVW) % 9 9 9 9 9
Maximum working speed km/h 4,3 4,3 4,3 4,3 4,3
Suction motor electrical properties (voltage - power) V / W 24 - 422 24 - 422 24 - 422 24 - 422 24 - 422
Vacuum on vacuum head KPa 11,9 11,9 11,9 11,9 11,9
Maximum solution tank capacity l 76 76 76 76 76
Maximum recovery tank capacity l 113 113 113 113 113
Maximum detergent tank capacity (CDS versions) l 3 3 3 3 3
Maximum debris hopper capacity l - - - - 5
Minimum inversion footprint mm 1600 1600 1600 1600 1600
Machine dimensions (length - height - width) mm
1495
1055
785
1515
1055
885
1545
1055
985
1390
1055
885
1475
1055
885
Battery compartment dimensions (length - height - width) mm
525
385
325
525
385
325
525
385
325
525
385
325
525
385
325
Machine weight when empty kg 169 178 187 187 180
Transported machine weight kg 297 306 315 315 307
GVW kg 368 377 386 386 394
Sound pressure level in operator seat [ISO 11201] (L
pA
) dB <70 <70 69 69 69,6
Sound power level [IEC 60335-2-72; IEC 62885-9; ISO 3744]
(L
wA
)
dB <80 <80 80,27 80,27 85,43
8