ComAp InteliDrive FLX LITE - Page 107

ID-FLX Lite Global Guide
107
Setpoint group
Communication
Settings
Related FW 2.5.0
Range [units] [DIRECT/MODBUS/ECU LINK]
Default value -
Step -
Comm object 24451 Related applications
Description
Communication protocol switches for the COM2 channel, if dual communication module is plugged in.
DIRECT LiteEdit communication protocol via direct cable.
MODBUS Modbus protocol. See detailed description in InteliDrive Communication Guide.
ECU link Protocol for communication with Cummins engines via Modbus.
Note: For details on communication speed and other technical parameters please see Technical data
on page 90.
For detail description see chapter Modbus protocol.
COM2 Mode
6 back to List of setpoints
Setpoint group
Communication
Settings
Related FW 2.5.0
Range [units] [-]
Default value -
Step -
Comm object 24436 Related applications
Description
In case that your modem needs additional initialization e.g. AT commands, it can be entered here. Otherwise
leave this setpoint blank.
ModemIniString
6 back to List of setpoints