ID-FLX Lite Global Guide
5
Speed switch 69
5.15.11 AUT mode: Engine regulation by RPM control – overview 70
Functions 3 and 4 71
Functions 3 and 4 setpoints 72
Functions 3 and 4 examples 72
Pressure by RPM control via J1939 73
Pressure by RPM control via Analog output 73
6 Troubleshooting 75
6.1 Alarm management 75
6.1.1 Sensor fail (Fls) 75
6.1.2 Warning (Wrn) 75
6.1.3 Cooldown (Cd) 75
6.1.4 Shut down (Sd) 76
6.1.5 List of possible alarms 76
6.2 History file 78
6.2.1 Record structure 78
6.3 Diagnostic messages read from ECU 79
6.3.1 List of ECU diagnostic codes 80
6.4 Tier 4 diagnostic codes 81
7 Communication 83
8 Communication 84
8.1 Direct cable connection 84
8.2 Remote connection 85
8.2.1 Internet connection 85
8.2.2 AirGate connection 85
8.2.3 Modem connection 85
8.3 Modbus connection 85
8.3.1 Modbus step by step 85
8.4 ECU engine support 87
8.5 Choosing the ECU to configure 87
8.6 ECU Analog inputs 88
8.7 Tier 4 engines support 89
9 Technical data 90
10 Appendix 92
Controller objects 93
10.1 List of controller objects types 93
To Next Page
Loading...
