InteliLite Global Guide
285
Setpoint group CM-4G-GPS Related FW 1.2.1
Range [units] 0..3600 [s]
Default value 0 s Alternative config NO
Step 1 s
Comm object 14609 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Delay for Fence 2 Protection (page 287).
Fence 2 Delay
6 back to List of setpoints
Setpoint group CM-4G-GPS Related FW 1.2.1
Range [units] Disabled / Enabled / LBI Enable [-]
Default value Disabled Alternative config NO
Step [-]
Comm object 11681 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint enables or disables geo-fencing function.
Disabled
Fence 1 Protection (page 286) and Fence 2 Protection (page 287) are disabled.
Enabled
Fence 1 Protection (page 286) and Fence 2 Protection (page 287) are enabled.
LBI Enable
Fence 1 Protection (page 286) and Fence 2 Protection (page 287) are enabled only when
logical binary input .GEO-FENCING ENABLED (PAGE 456) is active.
Geo-Fencing
6 back to List of setpoints
To Next Page
Loading...
