InteliLite Global Guide
298
Setpoint group Engine settings Related FW 1.2.1
Range [units] Primary / Secondary / Default [-]
Default value Default Alternative config NO
Step [-]
Comm object 14336 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Visible only if ECU is configured
Description
When logical binary input CONFIGURATION 2 (PAGE 450) is active, then setpoint ECU Frequency Select (page
193) has the same value as setpoint ECU Frequency Select 2 . Setpoint ECU Frequency Select (page 193)
can be changed from both places - from Basic settings setpoint group and from Alternate Config setpoint
group.
ECU Frequency Select 2
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.2.1
Range [units] 0 .. 100 [%]
Default value 50 % Alternative config NO
Step 1 %
Comm object 14338 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Visible only if ECU is configured
Description
When logical binary input CONFIGURATION 2 (PAGE 450) is active, then setpoint ECU Speed Adjustment (page
193) has the same value as setpoint ECU Speed Adjustment 2. Setpoint ECU Speed Adjustment (page 193)
can be changed from both places - from Basic settings setpoint group and from Alternate Config setpoint
group.
ECU Speed Adjustment 2
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
