InteliLite Global Guide
424
Value group Statistics Related FW 1.2.1
Units hours
Comm object 13771 Related applications AMF, MRS
Description
Assessment in hours when the fuel tank will be empty.
Note: This value is based on setpoint Fuel Tank Volume (page 185) and value from ECU Fuel Rate. For
correct calculation of this value is necessary to have configured ECU which send Fuel Rate value,
otherwise this value can’t be calculated.
Time Till Empty
6 back to List of values
Value group Statistics Related FW 1.2.1
Units minutes
Comm object 13772 Related applications AMF, MRS
Description
Assessment in minutes when the fuel tank will be empty.
Note: This value is based on setpoint Fuel Tank Volume (page 185) and value from ECU Fuel Rate. For
correct calculation of this value is necessary to have configured ECU which send Fuel Rate value,
otherwise this value can’t be calculated.
Time Till Empty
6 back to List of values
Value group Statistics Related FW 1.2.1
Units L
Comm object 9040 Related applications AMF, MRS
Description
Value containing total amount of consumed fuel by engine. The controller automatically updates this value
every 30 s. The controller can calculate it in three ways:
Direct reading from ECU
Calculation based on actual fuel consumption reading from ECU
Calculation from fuel level drop in tank (using Fuel Level Analog Input + Fuel Tank Volume (page 185)
setpoint)
Note: The accuracy of Total Fuel Consumption depends on the precision of ECU values or precision of
Fuel Tank Volume (page 185) and fuel level sensor.
Total Fuel Consumption
6 back to List of values
To Next Page
Loading...
Need help?
General
