InteliLite Global Guide
490
LBO: C
Related FW 1.2.1 Related applications AMF, MRS
Comm object 40
Description
This output is dedicated for coolant pump control. It is closed in the moment the gen-set is started and
remains closed until the gen-set is stopped and After Cooling Time (page 175) elapses or the cranking pause
or the Emergency Stop occurs or the controller is switched to OFF mode.
Image 8.160 Cooling Pump
Cooling Pump
6 back to Logical binary outputs alphabetically
Related FW 1.2.1 Related applications AMF, MRS
Comm object 74
Description
The output closes when gen-set is in Cooling state.
Cooling
6 back to Logical binary outputs alphabetically
LBO: E
Related FW 1.2.1 Related applications AMF, MRS
Comm object 348
Description
This output is active when an ECU is configured, but the communication with the ECU is not established or
has dropped out.
Note: When ECU POWER RELAY (PAGE 491) is not configured. If ECU POWER RELAY (PAGE 491) is
configured, output is evaluated only when engine is not stop (ECU POWER RELAY (PAGE 491) is active).
ECU Communic Error
6 back to Logical binary outputs alphabetically
To Next Page
Loading...
Need help?
General
