InteliLite Global Guide
93
Related setpoints for timer 2 are:
Timer 2 Function (page 271)
Timer 2 Repetition (page 272)
Timer 2 First Occur. Date (page 273)
Timer 2 Start Time (page 273)
Timer 2 Duration (page 273)
Timer 2 Repeated (page 274)
Timer 2 Repeat Day (page 277)
Timer 2 Day (page 276)
Timer 2 Repeated Day In Week (page 277)
Timer 2 Repeat Day In Month (page 277)
Timer 2 Repeat Week In Month (page 278)
Timer 2 Refresh Period (page 275)
Timer 2 Weekends (page 276)
Once
This is a single shot mode. The timer will be activated only once at preset date/time for preset
duration.
Daily
The timer is activated every "x-th" day. The day period "x" is adjustable. Weekends can be
excluded. E.g. the timer can be adjusted to every 2nd day excluding Saturdays and Sundays.
Weekly
The timer is activated every "x-th" week on selected weekdays. The week period "x" is
adjustable. E.g. the timer can be adjusted to every 2nd week on Monday and Friday.
Monthly
The timer is activated every "x-th" month on the selected day. The requested day can be
selected either as "y-th" day in the month or as "y-th" weekday in the month. E.g. the timer can
be adjusted to every 1st month on 1st Tuesday.
Short
period
The timer is repeated with adjusted period (hh:mm). The timer duration is included in the period.
Available modes of each timer:
Once mode
Set-up via LiteEdit2015
To set-up timer via LiteEdit2015 go to the setpoint ribbon, setpoint group scheduler and setpoint Timer 1 Setup.
Note: First of all function of timer has to be adjusted via setpoint Timer 1 Function (page 264).
To Next Page
Loading...
Need help?
General
