ComAp InteliVision 5 Global Guide

InteliVision 5 - Global Guide
12
Option
Controller
port
Settings in the controller
A RS232(1)
RS232(1) mode = DIRECT
RS485(1)conv. = DISABLED
B RS485(1)
Possible only for the concrete controllers firmwares where the setpoint RS485(1)
conv. in the setpoint group Comms is available
RS485(1) mode = DIRECT
RS485(1)conv. = ENABLED
C
RS232(2)*
**
RS232(2) mode = DIRECT
RS485(2)conv. = DISABLED
D RS485(2)*
RS232(2) mode = DIRECT
RS485(2)conv. = ENABLED
Note:
* RS232 or RS485 (1) direct connection can be used. They cannot be used simultaneously.
** Only available in IG-NTC / IS-NT-BB

ComAp InteliVision 5 Specifications

General

Brand	ComAp
Model	InteliVision 5
Category	Monitor
Language	English