InteliVision 5 - Global Guide
39
4.8 How to Log in
To enter a controller user:
Press Menu button.
Use ↑ or ↓ to choose Help/Others and press Enter
Use ↑ or ↓ to choose Users/Password menu item
Use ↑ or ↓ to go to Users field and press Enter.
Use ↑ or ↓ to set the correct user and press Enter. See the picture below:
Note: The controller is unlocked only when proper password is inserted.
When user is log in. Green lock is displayed in the right upper corner and appropriate access level is indicated.
See figure below:
To Next Page
Loading...
