ComAp InteliVision 5 Global Guide

InteliVision 5 - Global Guide
41
4.10 How to Change a Password
To change a controller password:
Log in, see the chapter How to Log in (page 39) and How to Enter a Password (page 40).
Press Menu button.
Use ↑ or ↓ to choose ChangePassword and press Enter button
Use → or ← to select the digit and use ↑ or ↓ to set the number you need to enter. See the picture below:
4.11 How to Log out
To log out:
Press Menu button.
Use ↑ or ↓ to choose Help/Others, press Enter
Use ↑ or ↓ to choose Users/Password menu item and press Enter
Use ↑ or ↓ to choose Logout and press Enter.
4.12 How to Reprogram InteliVision 5
For programming of a new firmware, upgrade of fonts and logo download the InteliVision 5 has to be connected
to any IG/IS-NT-(BB) controller to it’s NT-terminal interface, i.e. RS485(1)/display port.

ComAp InteliVision 5 Specifications

General

Brand	ComAp
Model	InteliVision 5
Category	Monitor
Language	English