InteliVision 5 - Global Guide
17
3.1.3 Context Buttons
Mode button Jump to the controller mode window
History Jump to history screen
Alarm Jump to Alarm list
GCB control GCB control (close/open GCB)
MCB control MCB control (close/open MCB)*
Note: *) MCB control button is present only in application where MCB is controlled. Context buttons may be
modified by users to fulfill customer’s requirements (see chapter User configurable soft keys buttons).
3.1.4 Control Buttons
Start Starts the gen-set
Stop Stops the gen-set
Fault reset Acknowledges faults and alarms (active only in Alarm screen)
Horn reset Deactivates the horn (audible alarm)
Note: Start and Stop buttons work in MAN or SEM mode only. START and STOP buttons are independent on
the InteliVision 5 screen, menu or sub-menu.
To Next Page
Loading...
Need help?
General
