ComAp InteliVision 5 Global Guide

InteliVision 5 - Global Guide
24
3.3.5 Combined Setpoints
Press the button when the proper setpoints group is chosen (e.g. ProcessControl)
Use arrows ↑ or ↓ to go to a certain set-point (e.g. PeakAutS/S del) and press Enter button, see picture
below:
Use ↑ or ↓ buttons to select the number, → or ← for the next position or Go Up/Go Down context buttons
and press Enter button.
3.3.6 Unauthorized access message
Setpoints can be locked for unauthorized edit. If a user does not have permission to edit certain setpoints,
"Access Denied" pop-up message is displayed (see picture below).
3.4 AlarmList Screen
On AlarmList screen you can see and work with alarms. When an error occurs, a new alarm appears in the
AlarmList screen, exclamation mark starts blinking on the measurement screens. A small alarm icon is placed
also to heading to be visible in all screens of IV5 including newly generated screens from Screen editor or by
adding new modules in configuration. See picture below:

ComAp InteliVision 5 Specifications

General

Brand	ComAp
Model	InteliVision 5
Category	Monitor
Language	English