Combilift Ltd C2500-C3000CB O&S Manual
1-8
C2500CB-OM-EN-11
Seat Adjustment
It is the responsibility of the Operator to ensure that the seat is adjusted
according to operator weight, height etc before operating the truck.
ALWAYS report any malfunctioning of the seat adjustments immediately.
ALWAYS wear the seat belt provided.
DO NOT adjust the seat when vehicle is in operation.
Keep clear of moving parts.
Authorised & competent personnel should carry out Installation &
Maintenance only.
1) The standard seat can be positioned
as the operator requires by releasing
the seat slide lever (item 1) and
moving the seat forward or back.
2) The weight adjustment is controlled
by moving the weight adjustment
lever (item 2) to increase or decrease
the firmness of the seat base
suspension. There are 5 weight
settings from 50-120 kg (110-265lbs).
3) The seat angle can be adjusted by
releasing the seat tilt lever (item 3)
and tilting the seat forward or back.
There are 2 seat tilt positions.
4) The backrest can also tilt to suit the
operator by releasing the backrest tilt
lever (item 4), and tilting the backrest
forward or back. There are three
backrest tilt settings.
2
3
4
To Next Page
Loading...
