CommScope ERA UAP2 - Maximum Output Power Levels

TABLE 2: Compliance Labels
Symbol Compliance Meaning
- FCC For industrial (Part 20) signal booster:
WARNING: This is NOT a CONSUMER device. It is designed for
installaon by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST
have an FCC LICENSE or express consent of an FCC Licensee to operate
this device. Unauthorized use may result in signicant forfeiture
penales, including penales in excess of $100,000 for each connuing
violaon.
- ISED WARNING: This is NOT a CONSUMER device. It is designed for
installaon by an installer approved by an ISED licensee. You MUST
have an ISED LICENCE or the express consent of an ISED licensee to
operate this device.
AVERTISSEMENT: Ce produit N'EST PAS un appareil de
CONSOMMATION. Il est conçu pour être installé par un installateur
approuvé par un tulaire de licence d'ISDE. Pour uliser cet appareil,
vous DEVEZ détenir une LICENCE d'ISDE ou avoir obtenu le
consentement exprès d'un tulaire de licence autorisé par ISDE.
CE To be sold exclusively to mobile operators or authorized installers - no
harmonized frequency bands, operaon requires license. Intended use:
EU and EFTA countries.
Indicates conformity with the RED direcve 2014/53/EU and/or RoHS
direcve 2011/65/EU.
CE Indicates conformity with the RED direcve 2014/53/EU and RoHS
direcve 2011/65/EU cered by the noed body no. 0700.
Maximum Output Power Levels
Table 3: Maximum Power Output by Frequency (page 12) lists the frequencies and maximum power
output for bands supported in the UAP2 variants.
TABLE 3: Maximum Power Output by Frequency
UAP2 Band DL Frequency Range (MHz) Power Output EIRP (dBm)
7E 729 - 756, 758 - 768 26.7
7 - 8 758 - 821 25.8
80 - 85 862 - 894 28.1
9 925 - 960 26.5
18 1805 - 1880 29.8
19 1930 - 1995 30.9
17E 2110 - 2180 30.7
21 2110 - 2170 30.8
25T 2496 - 2690 29.9
26 2620 - 2690 29.9
34T 3450 - 3550 29.3
DRAFT: CONFIDENTIAL
Chapter 1: Document Overview
CommScope ERA
®
UAP2 with Fiber Interface Installaon Guide , Release
P/N M0203AB, DRAFT Rev D 12