M0201ANC_uc CommScope Era
™
Fiber Low Power Carrier Access Point Installation Guide
© June 2019 CommScope, Inc. Page 7
Fiber CAP L Overview
CAP L Accessories and Options
The Fiber CAP L accessories and options are described in the following sections:
• "Fan Kit” on page 7
• "Mounting and Power Kits” on page 8
• "OCTIS Kits” on page 9
Fan Kit
Figure 3 shows the optional Fan Kit that is an integrated shroud that fits over a Fiber CAP L enclosure to
extend the upper ambient temper
ature range. The Fan Kit
• is IP55 rated
• increases the maximum operating temperature to 55°C (131°F)
• adds 3W power consumption to the Fiber CAP L; se
e "Required Antenna Distances” on page 16.
• is factory ins
talled but can be replaced in the field.
Figure 3. CAP L with the Optional Fan Kit
To Next Page
Loading...
