3. Installation
MF0121ACP_uc.docx Manual for Node AM4 Page 29
7. Clean the inside of the center
conductor spring tines with a cotton
bud drenched with isopropyl alcohol.
8. Clean in the similar way the connector of the
connected cable. Remove protective cap
from the cable connector first.
9. Remove metal chips and small particles from
the mating and inner surfaces of the
connector using compressed air.
10. Continue with the winding area using lint-free
wipe drenched with isopropyl alcohol.
11. Continue with the inside mating surface of
the inner ring.
12. Clean the outside surface of the center pin.