7. Specifications
MF0121ACP_uc.docx Manual for Node AM4 Page 77
7.2. Mechanical Specifications
Height,
width,
depth
Node AM4 chassis (with fan at backside)
177.0 x 482.3 x 462.8 mm
7 x 19 x 18.2 in
Node AM4 chassis (with fan at bottom)
177.0 x 482.3 x 436.3 mm
(7 x 19 x 17.2 in)
Weight
Node AM4 chassis 14 kg (30.8 lb)
RF card AX23 -
X25 3 k
6.5 lb
RF card AX35 -
X36 4.5 k
10 lb
Dual band RF card 6 k
13.2 lb
All data is subject to change without notice.
7.3. Environmental and Safety Specification
Operating
temperature range
RF card Ax23 - Ax25
RF card Ax35 - Ax36
-33°C to +55°C
-33°C to +50°C
Ingress protection IP65 (Fans: IP55)
Acoustic noise (fan unit backside type)
47 dB(A) @ 25°C
55 dB(A) @ 50°C
All data is subject to change without notice.
7.4. Features
Features
Statistic collection
Collecting data (min., max., average, standard deviation) of
items measured in a 15 minutes interval.
Gain trailing
Gain adjustment based on DL RSSI. UL gain is automatically
set correspondin
to DL
ain.
Access
Web browser based local access and remote access. Packet
data and circuit switched data options. OMC connectivity via
SNMP.
External alarms Up to 5 alarms, active hi
h or low confi
urable via software.
GPS functionality
Modem with a built-in GPS receiver for fast and easy location
detection available as an option. Based on received GPS
position the Node AM automatically changes the RF alarm
and/or connectivity configuration.
Battery Backup Battery backup to supply modem and controller for alarming
of mains power failure.
All data is subject to change without notice.
For detailed description of the features above, please refer to the software manual which
is part of the Node AM4 delivery.