7. Specifications
Page 72 MF0121ACP_uc.docx Manual for Node AM4
7. Specifications
7.1. Electrical Specifications
7.1.1. RF Card Options
Modulation
Scheme
RF Card
UL Frequency,
MHz
DL Frequency,
MHz
Max. Gain,
dB
Uplink Composite
Output Power, dBm*
Downlink Composite
Output Power, dBm*
LTE 700
AF 7524 703 to 748 758to 803 80 27 24
LTE 800**
AF 824
832 to 862 791 to 821
80 27 24
AF 835 90 27 35
LTE 850
AF 8524
824 to 849 869 to 894
80 27 24
AF 8535 90 27 35
GSM-R 900
***
AF 923 R
876 to 880 921 to 925
80 25 23
AF 936 R 90 25 36
GSM-R 900
***
,
EGSM 900
***
,
UMTS 900,
LTE900**
AF 923 RE
876 to 915 921 to 960
80
25 (GSM)
27 (UMTS, LTE)
23 (GSM)
25 (UMTS, LTE)
AF 936 RE 90
25 (GSM)
27 (UMTS, LTE)
36 (GSM, UMTS, LTE)
EGSM 900
***
,
UMTS 900,
LTE 900**
AF 923
880 to 915 925 to 960
80
25 (GSM)
27 (UMTS, LTE)
23 (GSM)
25 (UMTS, LTE)
AF 936 90
25 (GSM)
27 (UMTS, LTE)
36 (GSM, UMTS, LTE)
GSM 1800,
LTE 1800**
AF 1823
1710 to 1785 1805 to 1880
80
26 (GSM)
27 (LTE)
23 (GSM)
25 (LTE)
AF 1835 92
26 (GSM)
27 (LTE)
35 (GSM, LTE)
UMTS 2100,
LTE 2100**
AF 2125
1920 to 1980 2110 to 2170
82
28 (UMTS)
27 (LTE)
25 (UMTS, LTE)
AF 2135 92
28 (UMTS)
27 (LTE)
35 (UMTS, LTE)
LTE 2600**
AF 2625
2500 to 2570 2620 to 2690
82 27 25
AF 2635 92 27 35
* Output power per carrier (dBm) = composite output power (dBm) - 10
x
log (no. of carriers)
** LTE and UMTS uplink composite output power (dBm) valid for sub-bands ≤ 10 MHz, slight reduction of output power for sub-
bands > 10 MHz only”]
*** Downlink output power @ 2 carriers for AF936, AF936R, AF936RE: 30 dBm/carrier
table 7-1 RF card options, EMEA, single band cards
To Next Page
Loading...
General