ComNav Marine 1420 Autopilot System
Adjustment Commands
COMMAND ACTION RESULT
Rudder Response
Sensitivity:
decrease
Press and hold Speed Key
& then press Red Key
once
for each step of reduction in
Response Sensitivity
The Autopilot will not react
as strongly to course
deviations. It may "settle
down" onto a Course line
more quickly, and/or stop
swerving back and forth
across the Course line.
There are two Rudder
Response settings. Only the
Sensitivity of the currently
selected Rudder Response
will change.
Rudder Response
Sensitivity:
increase
Press and hold Speed Key
& then press Green Key
once
for each step of increase in
Response Sensitivity
The Autopilot will more
strongly correct Course
deviations. It may steer in
a straighter line.
There are two Rudder
Response settings. Only the
Sensitivity of the currently
selected Rudder Response
will change.
Change the
direction of the
Cross Track Error
Push and hold Nav key
& then press Green key
The Autopilot will steer
properly along Course line,
when the Cross Track
direction setting is correct.
Setup Routine Start with Autopilot off The Setup Routine begins
Press and hold Speed Key
& then press Pilot Key
once
Document PN 29010012 V1.3
53
To Next Page
Loading...
