Comnet CNGE2FE8MSPOE - Page 10

3
Sensitivity:
-36 to -32 dBm (Single mode); -34 to -30 dBm (Multi mode)
PoE pin
assignment
RJ45 port # 1~# 8 support IEEE 802.3af End-point,
Alternative A mode. Per port provides 15.4W ability.
Positive (VCC+): RJ45 pin 1,2.
Negative (VCC-): RJ45 pin 3,6.
Protocol
CSMA/CD
LED
Per unit: Power (Green), Power 1 (Green), Power 2
(Green), Fault (Red), Master (Green), FWD (Green)
8 port 10/100: Link/Activity (Green), Full duplex/Collision
(Amber)
SFP port: LNK/ACT(Green), 1000T: LNK/ACT(Green),
1000M(Green)
Power Supply
External Power Supply: DC 48V, Redundant power DC 48V
and connective removable terminal block for master and
slave power
Power
Consumption
116Watts (Full load)
Operating
Humidity
5% to 95% (Non-condensing)
Operating
Temperature
PIFE-802GBTMA: -10
o
C ~ 60
o
C
PIFE-802GBTMAE: -40
o
C ~ 75
o
C
Storage
Temperature
-40
o
C ~ 85
o
C
Case Dimension
IP-30, 72mm (W) x 105mm (D) x 152mm (H)
Installation
DIN rail and wall mount ear
EMI
FCC Class A, CE EN61000-4-2, CE EN61000-4-3, CE EN-