The flow time out is the amount of time it takes for the transaction to time out after flow stops, if
the nozzle is not hung up. The default depends on the dispenser mode. If the dispenser is in LPG
mode, the default time out will be 10 seconds. In non-LPG mode, the default time out will be 20
seconds.
If a different value is desired, enter this value in the menu below, in seconds. The maximum
flow time out is 120 seconds. If a value above 120 seconds is entered, the flow time out will
stay as 120 seconds.
See Using the Dispenser Menus to edit these settings. Use the procedure for both side A and B.
To Next Page
Loading...