Terminal Screen Messages
6-1
Terminal Screen Messages
6.1 The Initial Screen
Cursor Bar:
Move the cursor bar to a desired item, then
press [ENTER] to select
Controller Name:
Identifies type of controller or a preset name
Transfer Rate Indicator
Indicates the current data transfer rate
Gauge Range:
Use + or - keys to change the gauge range in
order to view the transfer rate indicator
Cache Status:
Indicates current cache status
Write Policy
Indicates current write-caching policy
Date & Time:
Current system date and time, generated by
controller real time clock
PC Graphic (ANSI Mode):
Enters the Main Menu and operates in ANSI
mode
Terminal (VT-100 Mode):
Enters the Main Menu and operates in VT-100
mode
PC Graphic (ANSI+Color
Mode):
Enters the Main Menu and operates in ANSI
color mode
Show Transfer Rate+Show
Cache Status:
Press [ENTER] on this item to show the cache
status and transfer rate
Chapter
ChapterChapter
Chapter
6
66
6
To Next Page
Loading...