Infortrend
C-6
Upgrading the Firmware Binary Only
1. From the Main Menu, scroll down to "System Functions."
2. Go to "Controller Maintenance."
3. Choose "Download Firmware."
4. Set ZMODEM as the file transfer protocol of your terminal
emulation software.
5. Send the Firmware Binary to the controller. In Hyper Terminal,
select "Send file." If you are not using HyperTerminal, choose
"Upload" or "Send" (depending on the software).
6. When the Firmware completes downloading, the controller will
automatically reset itself.
To Next Page
Loading...