Terminal Operation
7-34
7.13 System Functions
Choose “System Functions” in the main menu, then press [ENTER].
The System Functions menu displays. Move the cursor bar to an
item, then press [ENTER].
Mute Beeper
When the controller’s beeper has been activated, choose “Mute
beeper,” then press [ENTER]. Choose “Yes” and press [ENTER] in
the next dialog box to turn the beeper off temporarily for the current
event. The beeper will still be activated on the next event.
Change Password
Use the controller’s password to protect the array from
unauthorized entry. Once the controller’s password has been set,
regardless of whether the front panel, the RS-232C terminal interface
To Next Page
Loading...