Firmware Functionality Specifications
B-11
JBOD-Specific:
Format
Restore controller-maintained defect list to default
Reassign Blocks
Add entry to the defect list maintained by controller on disk
drives
Write-verification
Write following by a verify
SMART
Sense data and mode parameters support
Special mode
parameters
Error handling page – Enable/Disable retry
Caching page – Enable/Disable Read/Write caching
SMART enable parameters
Geometry – saved on format command completion
Others:
Customization of default
settings
Via the IAPPEND utility
Private logo
Supported
WWN seed read from
subsystem
Supported
Customizable SNMP trap
messages
Supported
Customizable inquiry serial
no. data to enable clustering
customization
Supported
To Next Page
Loading...