Infortrend
7-21
7.10 Viewing and Editing Host LUNs
Viewing or Deleting LUN Mappings
Choose the host channel and host ID combination you wish to view
or delete.
A list of the current LUN mapping will be displayed on the screen.
Move the cursor bar to the LUN mapping you wish to delete, then
press [ENTER]. Select Yes to delete the LUN mapping, or No to
cancel.
Edit Host-ID/WWN Name List
This is a specific item used for systems communicating over Fibre
host loops. Please refer to Chapter 8 Fibre Operation for more
details.
Pass-through SCSI Commands
If you have primary and secondary controllers, move the cursor to
the controller for the device that you wish to map; then press
[ENTER]. You will be prompted to map a SCSI ID to a physical
drive.
WARNING!
To Next Page
Loading...